Focusrite RedNet HD32R 32-Ch Dante Pro Tools|HD Bridge
Description
The RedNet HD32R 32-Channel Dante Networks Pro Tools|HD Bridge from Focusrite is a 1U, 19-inch rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system. This includes its very flexible network topology and high-quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.
The HD32R utilizes dual Ethernet ports with the provided locking etherCON connectors, and several operating modes, including daisy-chaining and redundancy, which are confirmed by front-panel indicators. Two separate power supplies with fault detection capability are included, with separate power input sockets (with retaining clips) on the rear of the unit. Additionally, its power status is indicated both remotely and on the front panel.
The HD32R features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.
Focusrite's RedNet was the first to offer IP networked audio interfaces for recording studios, education, live sound, and broadcast workflows, combining suitable audio interfaces with the time-tested reliability of the Dante Ethernet-based audio networking system from Audinate. Dante has been in use in the live sound industry for years in exacting applications without missing a single sample.
Dante networking offers a powerful combination of features that make it particularly useful for any Pro Tools|HD production environment. Focusrite's well-respected DC-coupled mic preamplifiers and exacting digital conversion helps to ensure a very high audio quality I/O, while Dante allows it to interoperate fully with Pro Tools|HD and Pro Tools|HDX.
Ethernet-based audio networking technology makes the need for complex, bulky and expensive analogue multi-way cables a thing of the past. Connected to Pro Tools|HD with RedNet HD32R, audio interfaces can be conveniently located anywhere an Ethernet port is available.
The HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM.
Key Features:
• Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD and Pro Tools|HDX
• Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
• Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
• Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
• Permits multiple workstations to access the same interface hardware and I/O
• No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
• Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
• Additional Avid/Digidesign interfaces may be connected to expansion ports
• Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plug-ins and saved sessions
What's Included?
• Focusrite RedNet HD32R 32-Channel Dante Networks Pro Tools|HD Bridge
• 2 x IEC AC Mains Cables
• 2 x IEC Mains Cable Retaining Clips